Sunny Brook Pressed Concrete is a large scale manufacture of pressed concrete
architectural pavers and pedestals for construction of ballast, roofs, walkways, terraces,
and plazas. Sunny Brook products have been used by contractors throughout the United
States in numerous new construction and renovation projects. Uses of Sunny Brooks
products include large scale construction projects at state and federal buildings, hospitals,
universities, shopping malls and office buildings.
Sunny Brook has a wide variety of sizes, colors and textures of Pavers to fit any need.
Custom colors and finishes can be accommodated.
Paver's
Hydraulically Pressed Concrete Pavers with the density and strength of stone. Sunny
Brook Pressed Concrete Pavers are manufactured on a hydraulic European press that
utilizes 460 tons of pressure to eliminate excess water and air from the wet concrete mix
to provide a superior Paver. Precision molds are used to provide uniform size and texture
to manufacture each Paver.
Sunny Brook Pavers have a minimum compressive strength of 8,000 pounds per square
inch (psi) (55,152 kPa) that can be increased upon request. Pavers have a water
absorption rate less than 5% and a density of 150 pounds per cubic foot. The compressive
strength, density, and lower water absorption rate insure a premium Paver and quality
installation.
Sunny Brook Pavers are typically not reinforced; however, they can be manufactured
with welded wire reinforcing to meet an architect's or engineer's specifications.
Sizes
Standard sized Pavers are nominal 23-1/2" x 23-1/2" and nominal 17-5/8 x 17-5/8 by 2"
in thickness.
Other Paver sizes and thickness can be manufactured. A mold set-up fee will be charged
for orders less than 1,900 square feet. Available sizes and thickness are as follows:
--Thickness --
Nominal Size Actual Size Min Max
12" x 12" 11-3/4" x 11-3/4" 1-1/4" 3"
12" x 24" 11-3/4" x 23-1/2" 1-1/4" 3"
15" x 15" 14-1/2" x 14-1/2" 1-1/2" 3"
15" x 30" 14-5/8" x 29-5/8" 1-1/2" 3"
16" x 16" 15-3/4" x 15-3/4" 1-1/2" 3"
16" x 30" 15-3/4" x 29-5/8" 1-1/2" 3"
18" x 18" 17-5/8" x 17-5/8" 1-1/2" 3"
18" x 18" 18" x 18" 1-1/2" 3"
18" x 24" 17-5/8" x 23-1/2" 1-1/2" 3"
24" x 24" 23-1/2" x 23-1/2" 1-1/2" 3"
24" x 24" 23-3/4" x 23-3/4" 1-1/2" 3"
24" x 24" 24" x 24" 1-1/2" 3"
24" x 30" 23-1/2" x 29-1/2" 2" 3"
24" x 36" 23-1/2" x 35-3/8" 2" 3"
30" x 30" 29-1/2" x 29-1/2" 2" 3"
30" x 30" 29-3/4" x 29-3/4" 2" 3"
36" x 36" 35-1/2" x 35-1/2" 2-1/2" 3"
Colors
Sunny Brook Pavers are available in an unlimited variety of colors. We will blend specific
colors upon request. Because our Pave's are made using natural materials, colors may
vary slightly. Contact our sales office for actual color samples.
Finishes
A wide variety Paver finishes are available, including brick faced, slate top, diamond,
quarry (Architectural), and textured with your choice of aggregate for an exposed finish.
Piers
Sunny Brook Pressed Concrete Company
manufactures and distributes Sunny Brook
Paver Piers. Paver Piers are used on terraces,
plazas, and waterproofed membrane roofs.
The Paver Piers roofing system features
excellent drainage, provides air circulation,
and reduces heat and sun exposure for the protection of the membrane. Paver Piers
also provide uniform and even spacing for Sunny Brook Pressed Concrete Pavers.
Paver Piers can level any problem areas by multiple stacking and implementation of
1/16" and 1/8" shims to level all surfaces. Paver Piers can be easily disassembled into
four sections for use on corners and borders. Paver Piers can accommodate custom
designs to fit special paving patterns.
Paver Piers are placed under the corners and at the midpoints for increased stability
and support in heavy traffic areas such as window washing equipment, vehicular traffic,
etc.
Pedestals
Pedestals are 5-1/2" x 5-1/2" (140 x 140 mm) and available in three thicknesses: 1/16",
1/8" and 5/8".
Please refer to following CAD drawing "Paver Pedestals" attached to this profile.
architectural pavers and pedestals for construction of ballast, roofs, walkways, terraces,
and plazas. Sunny Brook products have been used by contractors throughout the United
States in numerous new construction and renovation projects. Uses of Sunny Brooks
products include large scale construction projects at state and federal buildings, hospitals,
universities, shopping malls and office buildings.
Sunny Brook has a wide variety of sizes, colors and textures of Pavers to fit any need.
Custom colors and finishes can be accommodated.
Paver's
Hydraulically Pressed Concrete Pavers with the density and strength of stone. Sunny
Brook Pressed Concrete Pavers are manufactured on a hydraulic European press that
utilizes 460 tons of pressure to eliminate excess water and air from the wet concrete mix
to provide a superior Paver. Precision molds are used to provide uniform size and texture
to manufacture each Paver.
Sunny Brook Pavers have a minimum compressive strength of 8,000 pounds per square
inch (psi) (55,152 kPa) that can be increased upon request. Pavers have a water
absorption rate less than 5% and a density of 150 pounds per cubic foot. The compressive
strength, density, and lower water absorption rate insure a premium Paver and quality
installation.
Sunny Brook Pavers are typically not reinforced; however, they can be manufactured
with welded wire reinforcing to meet an architect's or engineer's specifications.
Sizes
Standard sized Pavers are nominal 23-1/2" x 23-1/2" and nominal 17-5/8 x 17-5/8 by 2"
in thickness.
Other Paver sizes and thickness can be manufactured. A mold set-up fee will be charged
for orders less than 1,900 square feet. Available sizes and thickness are as follows:
--Thickness --
Nominal Size Actual Size Min Max
12" x 12" 11-3/4" x 11-3/4" 1-1/4" 3"
12" x 24" 11-3/4" x 23-1/2" 1-1/4" 3"
15" x 15" 14-1/2" x 14-1/2" 1-1/2" 3"
15" x 30" 14-5/8" x 29-5/8" 1-1/2" 3"
16" x 16" 15-3/4" x 15-3/4" 1-1/2" 3"
16" x 30" 15-3/4" x 29-5/8" 1-1/2" 3"
18" x 18" 17-5/8" x 17-5/8" 1-1/2" 3"
18" x 18" 18" x 18" 1-1/2" 3"
18" x 24" 17-5/8" x 23-1/2" 1-1/2" 3"
24" x 24" 23-1/2" x 23-1/2" 1-1/2" 3"
24" x 24" 23-3/4" x 23-3/4" 1-1/2" 3"
24" x 24" 24" x 24" 1-1/2" 3"
24" x 30" 23-1/2" x 29-1/2" 2" 3"
24" x 36" 23-1/2" x 35-3/8" 2" 3"
30" x 30" 29-1/2" x 29-1/2" 2" 3"
30" x 30" 29-3/4" x 29-3/4" 2" 3"
36" x 36" 35-1/2" x 35-1/2" 2-1/2" 3"
Colors
Sunny Brook Pavers are available in an unlimited variety of colors. We will blend specific
colors upon request. Because our Pave's are made using natural materials, colors may
vary slightly. Contact our sales office for actual color samples.
Finishes
A wide variety Paver finishes are available, including brick faced, slate top, diamond,
quarry (Architectural), and textured with your choice of aggregate for an exposed finish.
Piers
Sunny Brook Pressed Concrete Company
manufactures and distributes Sunny Brook
Paver Piers. Paver Piers are used on terraces,
plazas, and waterproofed membrane roofs.
The Paver Piers roofing system features
excellent drainage, provides air circulation,
and reduces heat and sun exposure for the protection of the membrane. Paver Piers
also provide uniform and even spacing for Sunny Brook Pressed Concrete Pavers.
Paver Piers can level any problem areas by multiple stacking and implementation of
1/16" and 1/8" shims to level all surfaces. Paver Piers can be easily disassembled into
four sections for use on corners and borders. Paver Piers can accommodate custom
designs to fit special paving patterns.
Paver Piers are placed under the corners and at the midpoints for increased stability
and support in heavy traffic areas such as window washing equipment, vehicular traffic,
etc.
Pedestals
Pedestals are 5-1/2" x 5-1/2" (140 x 140 mm) and available in three thicknesses: 1/16",
1/8" and 5/8".
Please refer to following CAD drawing "Paver Pedestals" attached to this profile.
| Manufacturer of Pavers for roofs, plazas & walkways |
